MIL Spec List

SPECIFICATION

DESCRIPTION

A-423-66

One type of two-component epoxy based finish coat for the aerospace industry.

A-932-66

A two-component aluminized epoxy enamel.

A-A-8

Shellac Varnish.

A-A-208B

A marking ink.

A-A-344B

An interior and exterior lacquer.

A-A-665D

A nitrocellulose lacquer.

A-A-665E

A fast dry alkyd enamel.

A-A-857B

A thinner for reducing the viscosity of cellulose-nitrate based dopes and lacquers of the spraying type.

A-A-1452B

An acid, gasoline and oil resistant lacquer formulated for spraying the aluminum surface around storage batteries.
  – Type I: #17038 Gloss Black
  – Type II: #17875 Gloss White

A-A-1546A

A rubbing varnish.

A-A-1558A

A high opacity, solvent base coating for use in marking bales, crates, boxes, and drums.

A-A-2904

A mineral spirit, regular and odorless.

A-A-2962A

An exterior grade, semi-gloss alkyd enamel.

A-A-3003

A very high quality nitrocellulose lacquer.

A-A-3054

A heat-resisting paint.

A-A-3164

A low VOC, lusterless and semigloss synthetic resin lacquer.

A-A-3165

A durable, pigmented, high gloss lead and chromate free lacquer.

A-A-59166

A non-slip walkway coating for the exterior of aircraft surfaces.
  – Type I: Smooth, no grit
  – Type II: Grit added

A-A-59281

A cleaning compound of solvent mixtures.
  – Type I: Normal blend
  – Type II: Non-photochemically reactive blend

AMS-3170

One type of specially blended solvent specially formulated for the reduction of Graphite Varnish Coating.

Boeing BMS 10-11

Epoxy primer.
  – Type I, Class A, Grade A

C-1178-66

C-1178-66 type converter is an amine based catalyst.

DC6571-805

High heat aluminum coating. A silicone coating designed to withstand temperatures of up to 1500degrees F without failure.

DOD-E-24607A

A government specification, non-flaming enamel.

DOD-P-15328D

A two-component metal pretreatment wash primer.

MIL-A-6091

A specification denatured alcohol solvent.

MIL-C-450C
MIL-C-450

A bituminous, asphalt solvent type coating for application on the interior surfaces of ammunition.

MIL-C-8514C
MIL-C-8514

A metal pretreatment wash primer.

MIL-C-22750D
MIL-C-22750

A two-component epoxy-polyamide coating.

MIL-C-22750F
MIL-C-22750

A two-component, hi-solids, low-VOC, epoxy-polyamide coating.

MIL-C-27725B
MIL-C-27725

A corrosion preventive coating for aircraft integral fuel tanks.
Superseded to SAE-AMS-C-27725 .

SAE-AMS-C-27725
AMS-C-27725

Corrosion preventative, polyurethane for aircraft integral fuel tanks for use to 250 Deg. F.

MIL-C-38736B
MIL-C-38736

A cleaning compound of solvent mixtures.
  – Type I: Normal blend
  – Type II: Non-photochemically reactive blend.

MIL-C-46168D
MIL-C-46168

A two-component, hi-solids aliphatic, CARC polyurethane coating.

MIL-C-81773C
MIL-C-81773

A two-component polyurethane coating.

MIL-C-83231A
MIL-C-83231
AMS-C-83231 TY II, Cl A

A rain erosion-resistant polyurethane coating.

MIL-C-83286B
MIL-C-83286

A two-component, isocyanate/polyester polyurethane coating.

MIL-C-85285C
MIL-C-85285

A two-component aliphatic, polyester polurethane coating.

MIL-DTL-15090D
MIL-DTL-15090

A light gray equipment enamel for use as a topcoat on equipment.

MIL-DTL-24441C
MIL-DTL-24441

A two-component epoxy polyamide paint.

MIL-DTL-24631

An exterior grade polyester urethane paint.
  – Type I: Epoxy
  – Type II: Polyurethane

MIL-DTL-53039B
MIL-DTL-53039

Aliphatic polyurathane, single component, chemical agent resistant coating.
  – Type I: Maximum of 420 grams/liter
  – Type II: Maximum of 180 grams/liter

MIL-DTL-64159

Water dispersible aliphatic polyurethane, chemical agent resistant coating.
  – Type I: Silica-based flattening agents
  – Type II: Polymeric flattening agents

MIL-E-5558A
MIL-E-5558

A bake dry, alkyd base, wrinkle finish enamel.

MIL-E-7729B
MIL-E-7729

A high grade, single component, air dry, high gloss alkyd enamel.

MIL-E-11195E
MIL-E-11195

A fast drying, lusterless, low VOC alkyd enamel.

MIL-E-15090C
MIL-E-15090

A general purpose enamel.

MIL-E-15145E
MIL-E-15145

A zinc dust pigmented enamel.

MIL-E-16663A
MIL-E-16663

A rapid, air-drying and baking type enamels for production line application.
  – Type I: Air dry
  – Type II: Baking
  – Class 1: Rapid drying
  – Class 2: Flash drying

MIL-E-22118B
MIL-E-22118

A synthetic insulating enamel for use on electric equipment.

MIL-E-24635B
MIL-E-24635

An air-dry, silicone enamel.

MIL-E-52798A
MIL-E-52798

A camouflage alkyd enamel.

MIL-E-52891B
MIL-E-52891

A zinc phosphate type quick-dry lusterless enamel.

MIL-L-296B
MIL-L-296

A lacquer.

MIL-L-6805

A nitro-cellulose lacquer.

MIL-L-7178

A nitro-cellulose lacquer.

MIL-L-10287B
MIL-L-10287

A cellulose nitrate lacquer.

MIL-L-11195D
MIL-L-11195

A lusterless hot spray lacquer.

MIL-L-19537C
MIL-L-19537

A gloss acrylic nitrocellulose lacquer.

MIL-L-19538C
MIL-L-19538

A nitrocellulose camouflage lacquer.

MIL-L-52043C
MIL-L-52043

A cellulose nitrate semigloss lacquer.

MIL-L-81352A
MIL-L-81352

An exterior acrylic lacquer for protection of metal surfaces.

MIL-PRF-81352
MIL-PRF-81352B
MIL-PRF-81352C

General coatings for use on aircraft and support equipment.
  – Type I: Acrylic base
  – Type II: Alkyd base
  – Type III: Polyurethane base

MIL-P-8585A
MIL-P-8585

A low-moisture sensitivity, corrosion-inhibiting zinc chromate primer.

MIL-P-14105D
MIL-P-14105

A heat-resisting paint intended for use on steel that provides excellent protection.

MIL-P-15328D
MIL-P-15328

A metal pretreatment wash primer.

MIL-P-21035B
MIL-P-21035

A two part, high zinc dust content, galvanizing repair compound.

MIL-P-21563B
MIL-P-21563

A high visibility, durable, exterior, fluorescent paint system.

MIL-P-21600A
MIL-P-21600

A high visibility, durable, exterior, fluorescent paint system.

MIL-P-23377F
MIL-P-23377G
MIL-P-23377

A two-component, low VOC, high build, strontium chromate type epoxy-polyamide primer.
  – Type I, Class C: Yellow
  – Type II, Class C: Dark Green

MIL-P-24441A
MIL-P-24441

A heavy duty two component epoxy primer

MIL-P-26915B
MIL-P-26915

A lead-free, high-solids zinc-dust primer for steel surfaces.

MIL-P-46105

A single package, heat convertible/curing epoxy-based, zinc-rich primer.

MIL-P-52192B
MIL-P-52192

A two-component, air-drying or baking, chemical resistant epoxy primer.

MIL-P-53022A
MIL-P-53022

A lead and chromate free, corrosion-inhibiting, epoxy coating primer.

MIL-P-53022B
MIL-P-53022

A two component, flash dry, corrosion inhibiting lead and chromate-free epoxy primer.

MIL-P-53030A
MIL-P-53030

A two component, air dry, water reducible epoxy type primer for ferrous and non-ferrous metals.

MIL-P-85582D
MIL-P-85582

A two component, waterborne high-solids epoxy primer.
  – Type I: Standard #34151 Green
  – Type II: Low infrared reflective #34052 Green
  – Class C2: Chromate rust inhibitor formulation
  – Class N: Non-chromate rust inhibitor formulation

MIL-PRF-680

A degreasing solvent.

MIL-PRF-3043C
MIL-PRF-3043

A thermosetting resin coating for surfaces of engine components and metal parts.

MIL-PRF-22750F
MIL-PRF-22750G
MIL-PRF-22750

A high-solids epoxy coating.

MIL-PRF-23377G
MIL-PRF-23377H
MIL-PRF-23377J
MIL-PRF-23377

A two component, low VOC, epoxy-polyamide primer.
  – Type I, Class C: Yellow
  – Type II, Class C: Dark Green

MIL-PRF-23377K

Corrrosion inhibiting, chemical and solvent resistant, solvent-borne, high-solids epoxy primer coating.
  – Type I: Standard pigments
  – Type II: Low infrared reflective pigments
  – Class C2: Strontium chromate based corrosion inhibitors
  – Class N: Non-chromate based corrosion inhibitors

MIL-PRF-24635C
MIL-PRF-24635

A high grade copolymerized silicone alkyd semigloss enamel.

MIL-PRF-26915D
MIL-PRF-26915

Primer coating

MIL-PRF-81352B
MIL-PRF-81352C
MIL-PRF-81352

General coatings for use on aircraft and support equipment.
  – Type I: Acrylic base
  – Type II: Alkyd base
  – Type III: Polyurethane base

MIL-PRF-85285C
MIL-PRF-85285D

A two component aliphatic, polyester polyurethane coating. Superceded to MIL-PRF-85285E

MIL-PRF-85285E
MIL-PRF-85285

A two component aliphatic, high solids, low VOC, polyester polyurethane coating.

MIL-PRF-85582C
MIL-PRF-85582D
MIL-PRF-85582

A two component waterborne epoxy polyamine primer.
  – Type I: Standard #34151 Green
  – Type II: Low infrared reflective #34052 Green
  – Class C2: Chromate rust inhibitor formulation
  – Class N: Non-chromate rust inhibitor formulation

MIL-R-3043B
MIL-R-3043

A thermosetting resin coating for surfaces of engine components and metal parts.

MIL-T-19544E
MIL-T-19544

One type of specially blended solvent.

MIL-T-19588A
MIL-T-19588

A toluene/methyl ethyl ketone mixture solvent.

MIL-T-81772B
MIL-T-81772

  – Type I: Polyurethane thinner
  – Type II: Epoxy thinner
  – Type III: Lacquer and alkyd thinner

MIL-V-173C
MIL-V-173

An air dry, moisture and fungus resistant clear gloss varnish. Protects and insulates.

MIL-V-12276D
MIL-V-12276

A baking type, pigmented, semi-transparent phenolic varnish.

MIL-V-13811D
MIL-V-13811

An electrical ignition waterproofing varnish.

MIL-V-21064A
MIL-V-21064

A baking type finishing varnish.

MIL-W-5044C
MIL-W-5044

A non-slip walkway coating with non-skid properties.
  – Type I: Smooth, no grit
  – Type II: Grit added

P-415A-66

A two component chemically cured coating.

T-120-66

One type of thinner-reducer for pre-treatment wash primers.

T-262A-66

One type of specially blended solvent specially formulated for the reduction of two component epoxy coatings.

TT-E-485F

A semigloss rust inhibiting enamel.

TT-E-489G
TT-E-489H
TT-E-489J

A high grade, high gloss alkyd enamel.

TT-E-490E

A high grade silicone alkyd type copolymer gloss and medium gloss enamels.

TT-E-496B

A heat resisting enamel.

TT-E-515A

A quick dry, lusterless, alkyd enamel.

TT-E-516A

A quick dry, lusterless, styrenated alkyd enamel.

TT-E-527C
TT-E-527D

An exterior grade, lusterless alkyd enamel.

TT-E-529G

A semi-gloss, alkyd enamel.

TT-I-735

Grade A, isopropyl alcohol.

TT-L-20A

A nitrocellulose lacquer.

TT-L-32A

A very high quality nitrocellulose lacquer.

TT-L-50E
TT-L-50G

A high grade lacquer coating.

TT-L-54C

An acid resistant spraying lacquer.

TT-L-58E

A very high quality nitrocellulose lacquer.

TT-N-95B

An aliphatic naphtha solvent

TT-P-28G

A ready mixed, high heat coating formulated with silicone resin.

TT-P-38E

An air dry, ready mixed aluminum coating.

TT-P-320D

An aluminum pigment in powder or paste.

TT-P-636D

An alkyd primer coating.

TT-P-641G

A two part, high solids, zinc dust, zinc oxide primer.

TT-P-645A

A corrosion inhibiting, zinc chromate primer.

TT-P-645B

A zinc molybdate alkyd primer.

TT-P-664C
TT-P-664D

A synthetic, rust inhibiting, lacquer resisting primer coating.

TT-P-1757A

A low moisture sensitivity, corrosion inhibiting zinc chromate primer.

TT-P-1757B

A one component, alkyd base, corrosion inhibiting zinc chromate primer.

TT-P-2756A

A low VOC, self priming, polyurethane coating.

TT-T-266D

A thinner for cellulose-nitrate based dopes and lacquers.

TT-T-291F

Mineral Spirits.

TT-T-360E

A type of synthetic resin enamel thinner.

TT-T-548F

Toluene

TT-X-916B

Thinner primarily for use in protective coatings.